Garden & Greenhouse


How Magnesium Supplementation Helps Orchids

Posted April 20th, 2017 by Garden & Greenhouse in , ,

Magnesium is a major building-block in the formation of chlorophyll. Its role in the functioning of plant enzymes to produce carbohydrates, sugars and fats leads to the importance of regularly providing magnesium as part of an orchid feeding regime. Unfortunately, not all fertilizers provide magnesium, so it is sometimes necessary to add it via some sort of supplementation. Fortunately, that is easy to do using inexpensive Epsom Salt purchased from your neighborhood druggist. But of course, we need to consider just how much to use, and how often to do so.

Epsom Salt is a magnesium sulfate mineral – giving a double benefit, as sulfur is a plant nutrient as well. (Its name incidentally, comes from a bitter, saline spring at Epsom, Surrey, England, where it was found to be useful as a bath salt and laxative back in Shakespearean times.) The form that can be purchased at the drug store is the septahydrate, MgSO4•7H2O. By mass, that means that Epsom Salt is approximately 10% magnesium and 13% sulfur, with the balance being hydrogen and oxygen.

Many will acknowledge that the Greencare Orchid Special formula for RO water – the original, so-called “MSU” fertilizer – is a very good, complete fertilizer formula. It contains 2% Mg in its dry form. In order to achieve the commonly-recommended fertilizer solution concentration of 125 ppm Nitrogen, the label tells us to use 3.55g of fertilizer to create a gallon of solution. That means, therefore, that the gallon contains 3.55g x 2% = 0.071g Magnesium.

If our fertilizer contains no magnesium, and we want to add that same 0.071gram per gallon using Epsom Salt, we would need 0.071g ÷ 0.10 = 0.71g of Epsom Salt per gallon of solution.

Since most growers don’t have a lab scale handy to measure that, let’s convert it to a practical volume measurement. The bulk density of granular drug store Epsom Salt is about 1.05g/cc. That means that we would need 0.71g ÷ 1.05g/cc = 0.68cc per gallon. As there are approximately 5 cc (or ml) in a teaspoon, that’s just a bit more than 1/8 teaspoon (0.136 versus 0.125 – 9% more).

Using the “MSU” fertilizer approach of continuous feeding, says we should add about 1/8 teaspoon of Epsom Salt to every gallon of fertilizer we apply. Some however, prefer to do periodic supplementation – typically monthly – but to in order to keep a similar, overall addition level, we need to consider our feeding frequency.

If you typically feed three out of four waterings, and water twice a week, then over the course of a month you feed about six times. To achieve the same amount of magnesium as if you had supplemented your fertilizer at every feeding, you would need 0.136 x 6 = 0.816 teaspoons – or to make life a bit easier – somewhere between 3/4- and 1 teaspoon per gallon, added to your fertilizer solution once a month.

Others do quarterly additions, meaning they should be on the order of a tablespoon per gallon. But at that concentration, the amount of dissolved solids is getting up there, so rather than adding it to the fertilizer and raising the TDS even more, it is probably better to add it to plain water only for application.

Ray Barkalow has been growing orchids for over 45 years, and owns First Rays, which offers horticultural products to the hobby grower. He may be contacted at and you can visit his website at

Read More Articles

Choosing the Best Orchid Container

Light Reflections & Reflectors for Orchids

Orchid Light Level Recommendations

The Importance of Flushing Orchid Potting Media

Free Subscription to Garden & Greenhouse Magazine

Free Subscription to Garden & Greenhouse Email Newsletter