Working from home can seem like the perfect set-up, but after a while having no boundaries between your downtime and work can become a problem. Everyone needs a dedicated space to work out of. However, if space is at a premium then you may have to get creative with your workspace. Converting a garden shed into a home office can be a great way to make a secure separated space for working without spending a lot.
With a home office for you can improve your productivity and that important work-life balance, all without leaving your home. Making a home office from a garden shed might be easier than you think, it can be achieved relatively quickly if you go about it in the right way. These are the steps for converting a garden shed into a home office the right way.
The first step to converting a garden shed into a home office is planning. You might be excited to start work, but this is the most important stage. There a few big decisions you’re going to have to make. The first is if you want electricity running to your home office. This can be useful if you need to run a computer or charge a laptop. However, it will make your conversion a lot more complicated.
You also need to think about lighting. You will probably need some lighting in your home office for the darker months, but you can work around electricity if you don’t want power sockets in your new office. You need to measure up the shed you already have and decide what sort of space you want to build. If you don’t think you have enough of a foundation to turn your shed into an office, you can think about replacing your shed with one that’s more fit for its new purpose.
Once you’ve taken stock of your resources and decided what type of home office you will be turning your shed into, it is time to design your home office. You will need to plan out how your shed is going to look when it is finished. If you’re adding electricity, you need to plan out where you will run the wiring to your shed. You need to consider which section of your garden you can dig up to run it under since electrifying your shed is a major undertaking.
You also need to plan out windows to ensure your office will plenty of natural light. Natural light is really important for making a nice working environment, you should work in as many windows as you can.
3. Work with What You’ve Already Got
The good thing about converting a garden shed into a home office is that you have plenty already built. You should work with what you’ve already got rather than reinventing the wheel. Make sure that each wall is fully secure and that the roof will not drip. This is especially important for the rainy times of the year since you will have electronics in there.
The wood used for the shed should be checked for rot or instability and replaced if necessary. Since you’re going to be building on this to add insulation, you need to have a secure and solid wall to start with. You should then add in the windows as you planned in your designing stage.
4. Insulating your shed
With a working home office, you need to ensure it stays warm. You can achieve this using insulation to keep your home office warm no matter the weather. Insulating your shed is relatively simple compared with hooking up the electricity. You need to purchase the necessary materials for the insulation and additional wood to cover up the insulation so you’re still working in a nice environment. A coat of paint after installation can be done when you’re adding in your new floor to give you a nice environment during the working day. This guide will run you through insulating a shed to make sure you get it right.
5. Adding Lighting and Power
This is by far the most complicated step. If you only need electricity for lighting, then you can make this a bit simpler. Solar panelled lighting can be powered from a panel attached to the side of the shed for adequate lighting.
However, if you need power sockets to run things in your home office then you won’t be able to use this workaround. A generator might work, but this isn’t a great long-term solution. If you’re going to get a lot of use out of your home office, then wiring in power is the best solution. You will need to dig a trench from your home to the shed to run the power through. You should consult an electrician and ensure this is done correctly.
Converting a shed into a home office can take some time, but it will be rewarding. Once you’re finished you will have a comfy and secure working space away from all those distractions in the home. With a strong enough Wi-Fi connection, you’ve got a dedicated environment to stay productive even when you’re working at home.
The Best Way to Stain Your Teak Furniture
If you’re unfamiliar with teak, it’s a large tree that’s grown in tropical forests. Its superior ability to resist elements in comparison to other woods is why it’s often used to make outdoor furniture. While it’s very resistant, it still has to be treated. If not treated, it can fade to a greyish color. Staining helps to prevent the fading from happening. It’s a simple process that just requires the right tools and techniques. Here’s how to properly stain your teak furniture.
Before you stain your teak furniture, you have to sand and smooth out the wood first. Take a dry paper towel and brush off any dirt, dust, or debris. If some spots are a little harder to remove, use a wet rag to rub the area clean. Any grease, dust, or dirt left on the surface of your wood will cause the stain to not properly adhere. Avoid any use of cleaning products. It will make staining more difficult and also potentially damage your wood.
Move your hand over the furniture to locate rough spots in the wood. If there are areas that have to be sanded down to match the rest of the surface, use 120 grit sandpaper to do it. As you’re sanding, frequently check to see if the spot has become even with the rest of the wood. When you’re doing that, you’ll need to ensure the surface is even and ready to absorb the wood stain. Use 220 grit sandpaper to sand the entire surface until it feels smooth and even.
It will open up the pores of the wood, allowing for the stain to more efficiently adhere to the surface. Be sure you’re sanding along the grain, so you don’t risk scratching up the wood. Afterward, wipe off any wood dust with a dry rag.
Take a foam brush to paint a layer of sanding sealer on the wood. It will make the surface smoother and help give your wood stain a better grip. Dilute your sealer with mineral spirits if you want to achieve a lighter color. After the sealer has started drying, grab a clean cloth, and wipe off any remaining sealer that’s pooled atop the wood. Doing this will reduce the possibility of spots or blotches forming on the wood and keep your surface smooth. The sealer needs to be dried completely. It will likely only take a few hours for this to happen. When completely dry, sand the surface a few more times with 220 grit sandpaper. It will ensure any spots where your sealer didn’t dry evenly are smoothed out. After sanding, wipe off any remaining residue with a rag.
Several tools are useful for painting on the stain. You can use a bristle, a foam, or even a cloth dipped in stain. You’ll want to apply an even coat all over the wood. If there are parts of the furniture you want to avoid staining, you can use masking tape to protect those areas. Wood stain can come in a water-based formula or an oil-based formula. While water-based formulas tend to be more common, oil-based will potentially last longer.
After staining, wipe off any excess amounts not absorbed by the wood with a clean, dry rag. Make sure it’s a rag you don’t mind getting dirty, as the stain can be tough to get washed out. Keep in mind that the longer you leave the stain on before wiping, the darker it will be. The amount of time that it will take for your stain to dry completely depends on the thickness of the layer you used. You don’t want to touch the stain too much if it’s still wet. Otherwise, you could end up with a blotchy, uneven coat.
When the first coat of stain is dry, observe the wood’s color and determine if you’re satisfied with it. If you decide that you want the furniture to be darker, add a second coat of wood stain on top of the previous layer. Repeat the same process as before. After repeating the process, you can use a clean brush to paint the finish if you’ve got the desired color. Once the finish is applied, give it time to try. Be mindful that there are three main types of finish.
Oil finishes look the closest like wood. Unfortunately, this finish isn’t the best for protecting wood and shouldn’t be used on outdoor furniture. Lacquer finishes can give an attractive look while also providing durability to the wood. Be mindful that this finish will require multiple coats. Polyurethane finishes tend to be the best in protecting wood, as it’s effective in even repelling water.
What brand and color match teak wood?
You can mix and match colors like cream and tan. With accent colors, pay attention to the undertones that are on the stain your teak has. Teak often has an orange undertone. If your goal is to bring out this color, go with the opposite color on a color wheel chart. The opposite one, in this case, would be blue.
If there are some gouges or rough areas in the furniture, try using a wood filler before you stain it. If you want some idea of what color you’ll get from staining your teak furniture, use these steps on a plank of teak first. Then, you’ll be able to know if you’re using the right stain or finish to get the kind of color you want to achieve. It will also be good practice for doing these steps correctly. It’s important to remember that wood stain can cause your skin to be irritated. It’s best to wear rubber gloves whenever you’re staining teak.
Teak furniture can be one of the most useful styles to consider selecting for your outdoor furniture. Properly maintaining it through staining is necessary to prevent fading. Following all of these tips will help you keep your outdoor furniture looking nice for a long time. Here’s where you can learn more about Garden Furniture Teak.